[Android] FreeScale i.MX6DL SABRE platform pre-built Android 4.4.2 image.

1.Downloaded and unzipped the image (android_kk4.4.2_1.0.0-ga_full_image_6qsabresd)

2.Downloaded and unzipped the MFG tool (Mfgtools-Rel-13.01.00_ER_MX6DL_UPDATER)

3.Created "android" directory under MFGTool-Dir/Profiles/MX6Q Linux Update/OS Firmware/files

4.Copied the following files from android_jb4.2.2_1.0.0-ga_image_6qsabresd.tar.gz to the MFGTool-Dir/Profiles/MX6Q Linux Update/OS Firmware/files/android/ directory.

u-boot-6dl.bin
SD/boot.img
SD/system.img
SD/recovery.img


5.Changed the SABRE-SD SW6 (boot) to 00001100 to enter download mode Updated the MFGTool-Dir/cfg.ini file so that

[profiles] chip = MX6DL Linux Update [platform] board = SabreSD [LIST] name = Android-SabreSD-SD

6.OTG-USB cable connected to the motherboard and computer.

7.Run MfgTool2.exe.

8.Development board connected to the power supply, the following "HID-compliant device", click "Start" to start the download.

 9.After the download is complete. Turn off the power development board.
Changed the SW6 (boot) to 01000010 to enter SD-card boot mode.

============================================================================

1.Downloaded and unzipped the image (android_kk4.4.2_1.0.0-ga_full_image_6qsabresd)

2.Downloaded and unzipped the MFG tool (Mfgtools-Rel-13.01.00_ER_MX6DL_UPDATER)

3.Created "android" directory under MFGTool-Dir/Profiles/MX6Q Linux Update/OS Firmware/files

4.Copied the following files from android_jb4.2.2_1.0.0-ga_image_6qsabresd.tar.gz to the MFGTool-Dir/Profiles/MX6Q Linux Update/OS Firmware/files/android/ directory.

u-boot-6dl.bin
eMMC/boot.img
eMMC/system.img
eMMC/recovery.img


5.Changed the SABRE-SD SW6 (boot) to 00001100 to enter download mode Updated the MFGTool-Dir/cfg.ini file so that

[profiles] chip = MX6DL Linux Update [platform] board = SabreSD [LIST] name = Android-SabreSD-eMMC

6.OTG-USB cable connected to the motherboard and computer.

7.Run MfgTool2.exe.

8.Development board connected to the power supply, the following "HID-compliant device", click "Start" to start the download.

 9.After the download is complete. Turn off the power development board.
Changed the SW6 (boot) to 11010110 to enter eMMC boot mode.